No Image 1-877-642-7244
Advanced Search
Print this Page Send this Page
  1. pin-int

Scotch-Weld™ 021200-82244 TC Series Hot Melt Applicator, 2.6 to 3.5 lb/hr Output, Pneumatic Drive

  • Manufacturer: 3M
  • Brand: Scotch-Weld™
  • MPN: 021200-82244
    UPC: 021200822445
    NHBPN: MM 021200-82244
    Min. Ord. Qty: 1
    Package Qty: 1
  • Price:

3M™ hot melt applicator TC is a lightweight, easy to control applicator that dispenses up to 3.5 lb of adhesive per hour, maintaining a fixed temperature of 385 deg F (196 deg C). It is designed for use with 5/8 x 2 in TC hot melt adhesive sticks. Dispenses up to 3.5 lb of hot melt adhesive per hour 3M™ hot melt applicator TC uses 120V/150W power to maintain a 385 deg F (196 deg C) temperature for consistent, reliable dispensing of 5 x 2 in TC hot melt adhesives. This lightweight applicator (only 10 oz.) was built for ease of use, with the on demand feed control helping minimize hot melt waste and dripping. Recommended applications small joint assembly mounting and trim attachment point of purchase displays, trade exhibits understanding hot melt applicators. Hot melt adhesive applicators, commonly called "glue guns" are tools used to apply liquefied thermoplastic adhesives and are available in low and high temperature versions. Low temperature adhesive applicators operate at approximately 250 deg F (121 deg C) and are beneficial when bonding heat sensitive materials such as electronics, plastics and cloth. High temperature applicators operate at a minimal temperature of approximately 380 deg F (193 deg C) and can dispense adhesives that produce a stronger bond than low temperature adhesives. Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.

Scotch-Weld™ Hot Melt Applicator, Series: TC Series, 2.6 to 3.5 lb/hr Output, Pneumatic Drive, 120 VAC, Corded Cord

Cord Type      :      Corded
Drive Type      :      Pneumatic
Output Rate      :      2.6 to 3.5 lb/hr
Series      :      TC Series
Voltage Rating      :      120 VAC
  • Delivers up to 3.5 lb of standard-melt 3M™ Scotch-Weld™ adhesive per hour
  • On demand feed control minimizes waste
  • Lightweight , balanced design provides easy, precise control
  • Manual feeder holds adhesive stick securely and provides even pressure
  • Innovative transport mechanism minimizes dripping
  • Hot melt operating temperature

Write Review

Atleast 50 Characters. You can Express Upto 1000 Characters

© NH Bragg, A Division of Horizon Solutions, 2019 - All Rights Reserved

Login Sign Up

Forgot my Password ?

In order to purchase items from NH Bragg you must have an account with us and you must log in. NH Bragg is a distributor of industrial supplies and safety equipment to its commercial customers. If you have an account with NH Bragg, but have not yet registered on, pleaseclick HERE. If you do not have an NH Bragg account and you would like to apply for one,click HERE to access our credit application.

Add Item To Add Item To